sensor

B-type insertion sensor (direct insertion)

A pair of insertion-type transducers are inserted into the pipe wall to interrogate the flow in the pipe. Since the transducers do not extrude into the flow, they do not generate any disturbance or cause any pressure drop. There is no moving parts to wear out.

If the pipe material is carbon steel or stainless steel can be installed directly welding,but if the pipe material is cast iron, FRP,PVC or cement please contact with the manufacturer to order the dedicated pipe hoop. To prevent leak water please give the exact outside diameter or perimeter to the manufacturer.

B-type insertion sensor (direct insertion),the parameters as below:

Pipe size:more than DN80mm

Frequency:1MHZ

Pipe material:All metals,most plastics,fiber glass,etc,

Application of temperature:-40-160oC

Installation method:Z method

bore Size:φ19mm(please use the manufactures dedicated tools to drill,it can install with pressure.)

Protection class:IP68(can work in water, and water depth≤3 meter)

Liquid types:Water,sea water.waste water,chemical liquids,oil,crude oil,alcohol,beer,etc.

Suspension concentration:≤20000ppm,may contain very small amount of air bubbles.

sensor